WELDED TUBES WITH SEAM, CIRCULAR, SQUARE, RECTANGULAR HOLLOW SECTIONS ACCORDING TO EN 10219-2

 

APPLICATION FIELD
These tubes have wide application range. The tubes are used to fabricate metal furniture, for global needs in machinery building, locksmithing, motorcycle and bicycle industry, automobile industry, light steel constructions building, in agriculture industry and agriculture machinery, to manufacture scaffolds and piers in constructions building, etc.

TECHNICAL REGULATIONS FOR FABRICATION
The technical regulations for steel tubes with seam fabrication are defined by EN 10219-2 standard.

WELD SEAM
The weld seam is approximately placed along the middle of one side of the tube. The weld seam is removed only from outside.

LENGTH

Length could be in range 4000mm – 10000mm, with tolerances according to EN 10219-2, standard. Standard length is 6000mm.
No additional end-processing after cutting.
End processing only on Customer demand.

MATERIAL
Uobičajeni materijal za izradu šavnih cevi je S235, S275, S355 prema EN 10025 ili DD 11 prema EN 10111. Kvaliteti S275 i S355J2G3 ugovaraju se posebno.

MATERIAL
Usual material for tube production is steel grade S235, S275, S355 according to EN 10025 or DD 11 according to EN 10111. Production of tubes made of steel grade S275 and S355 on Customer's demand.

 

Download pdf catalogue (1,3 MB)

Download the catalog of additional production of the factory in Aleksincu (3 MB)

 

2012. Utva Silosi a.d. Kovin || Design by Gomo Design